Pattern leather photographer’s bag for camera and lenses
1. Main Pattern Pieces:
A. Outer Body:
- Front and Back Panels:
- Number of pieces: 2 (one front, one back)
- Dimensions:
- Width: Approximately 35 cm
- Height: Approximately 25 cm
- Details: The front panel includes a built-in pocket (pattern for this is described below), while the back panel is plain.
- Bottom Panel:
- Number of pieces: 1
- Dimensions: 35 cm × 12 cm (width of the bag × depth)
- Details: A rectangular piece that is sewn to the bottom of the front and back panels.
- Side Panels:
- Number of pieces: 2
- Dimensions: 25 cm × 12 cm (height × depth)
- Details: These panels may include slots for side loops and possibly small side pockets.
B. Top Flap:
- Number of pieces: 1
- Dimensions:
- Width: 35 cm
- Length: Approximately 30 cm (to drape over the front and cover the front pocket)
- Details: Includes a metal clasp for closure.
C. Front Pocket:
- Number of pieces: 1 (for the pocket), 1 (for the pocket flap)
- Dimensions:
- Pocket: 25 cm × 15 cm
- Flap: 25 cm × 10 cm
- Details: The front pocket is sewn directly onto the front panel, and the flap is sewn at the top and secured with a clasp.
2. Inner Lining and Dividers:
A. Inner Lining:
- Main Lining Piece:
- Number of pieces: 1
- Dimensions: Same as the front, back, bottom, and side panels combined.
- Details: Cut to match the outer body dimensions, with adjustments to fit snugly inside.
- Dividers:
- Number of pieces: 3
- Dimensions:
- 2 pieces: 20 cm × 12 cm
- 1 piece: 12 cm × 12 cm
- Details: The dividers are secured inside the bag using Velcro.
3. Straps and Handles:
A. Shoulder Strap:
- Number of pieces: 1 (main strap) + 2 (side attachments)
- Dimensions:
- Length: Approximately 100-120 cm (for the main strap)
- Width: 4 cm
- Details: The strap attaches to the sides of the bag using metal rings.
B. Handles (Optional):
- Number of pieces: 2
- Dimensions: 20 cm × 4 cm each
- Details: Handles are sewn to the top of the bag as an optional feature.
4. Bag Assembly:
- Assemble the Outer Body:
- Sew the front and back panels to the bottom panel.
- Sew the side panels to the assembled body.
- Attach the Inner Lining:
- Sew the inner lining in the same manner, then insert it inside the outer body and secure it.
- Add the Front Pocket and Flap:
- Sew the front pocket to the front panel, then attach the flap above it.
- Attach the Top Flap:
- Sew the top flap to the back panel, allowing it to drape over the front.
- Add the Shoulder Strap and Handles:
- Sew the shoulder strap to the sides and attach the handles, if desired.
5. Final Touches:
- Finish all edges by sealing with edge paint or wax.
- Secure all clasps and metal rings in place.
This detailed pattern description should help you design and assemble a bag similar to the one shown in your images.